Why is my pool green? Free troubleshooter
The usual reasons a pool turns green
Algae (most common)
Green, cloudy water almost always means algae, and algae means free chlorine fell below the minimum for your stabilizer (CYA) level. It can bloom within a day or two in warm, sunny weather. Many strips still show "some" chlorine, but if FC is below about 7.5% of your CYA, it isn't enough. Check the FC/CYA table:
| CYA (ppm) | Minimum FC | Target FC | Shock (SLAM) FC |
|---|---|---|---|
| 0 | 1.0 | 2.0 | 10 |
| 20 | 1.5 | 3.0 | 10 |
| 30 | 2.2 | 4.0 | 12 |
| 40 | 3.0 | 5.0 | 16 |
| 50 | 3.8 | 6.0 | 20 |
| 60 | 4.5 | 7.0 | 24 |
| 70 | 5.2 | 8.0 | 28 |
| 80 | 6.0 | 9.0 | 32 |
| 90 | 6.8 | 10.0 | 36 |
Based on the TroubleFreePool FC/CYA chart: minimum ≈ 7.5% of CYA, target ≈ CYA ÷ 10 + 1 (the low end of their target range), shock ≈ 40% of CYA, with floors of 1, 2 and 10 ppm. Rounded, so values can differ from their chart by a fraction of a ppm.
Fix: shock and hold. Raise FC to the shock level for your CYA, keep it there by retesting and re-dosing several times a day, brush daily and run the filter 24/7 until the water is clear, combined chlorine is 0.5 ppm or less, and FC drops 1 ppm or less overnight. TroubleFreePool calls this SLAM; it typically takes a few days to a week. Get pH to 7.2–7.6 first so the chlorine works. Our chlorine guide and calculator give the doses.
Metals (clear green or teal water)
If the water is clear but tinted, or turned green right after you shocked, dissolved metals are likely: copper (from copper algaecides, ionizers, or corroded heater parts) gives blue-green; iron (often well water) gives green-brown or rusty. Chlorine oxidizes them, which brings out the color. Fix: lower pH to about 7.2, use a metal sequestrant per its label, and consider a metal-free fill source. Don't add more copper algaecide. See TroubleFreePool on stains and metals.
Mustard (yellow-green) algae
Yellow or green dust that collects in shady corners and brushes off easily, then comes back. It's chlorine-sensitive but hides in equipment, toys and swimsuits. Fix: SLAM, and sanitize everything that's been in the pool (TroubleFreePool on mustard algae).
Black algae
Dark spots with raised edges, mostly on plaster, that resist brushing. Fix: SLAM plus vigorous brushing with a stainless brush on plaster (nylon on vinyl), and patience.
Is it safe to swim in a green pool?
No. Green water means the sanitizer has lost the battle, so germs may be growing too, and murky water hides swimmers in trouble. TroubleFreePool's advice is to stay out until it's clear (their explanation); the CDC's guidance is to keep chlorine and pH in range at all times (CDC).
How to keep it from coming back
- Test FC at least every other day in swim season, daily in a heat wave.
- Keep FC at the target for your CYA, not just "above 1 ppm."
- Watch CYA creep if you use tabs; see the CYA guide.
- Run the pump long enough to turn the water over at least once a day.
Sources
- TroubleFreePool: SLAM (Shock Level And Maintain)
- TroubleFreePool: Defeating algae
- TroubleFreePool: The Free Chlorine and Cyanuric Acid Relationship
- TroubleFreePool: Stains in your pool
- TroubleFreePool: Mustard algae
- TroubleFreePool: Should you swim in a green pool?
- TroubleFreePool: Perform the overnight chlorine loss test (OCLT)
- CDC: Home Pool and Hot Tub Water Treatment and Testing
- CDC: 2024 Model Aquatic Health Code, 5th edition (code language, PDF)